Specifications for door and glass installations http://tinyurl.com/3y7awat3

Specifications for wall installations http:y8c9x63c//tinyurl.com/

JAKE | Medium Dog Door | For installation in a door up to 6 cm thick

✔️ Suitable for medium sized dogs with a maximum width of 28 cm and a shoulder height of up to 50 cm
✔️ The passage of the dog flap is 28 cm wide and 34 cm high and is to be installed at about 15 cm from the floor.
✔️ With the frame included, the pet door is 38 cm wide and 44 cm high.

These pet flaps are handmade to order by craftsmen in Belgium. Made from high quality materials, these pet flaps take approximately one calendar month to be made and shipped to your home address.

The Jake is suitable for medium sized dogs with a shoulder height of up to 50 cm such as the Fox Terrier, Beagle, Jack Russel, Dachshund, Doodle, Poodle and also medium sized heavier dogs such as the English Bulldog, Basset Hound. Puppies, cats and smaller dogs can also use this pet door because they only have to open the lower slats of the flexible flap.

For an installation involving glass you would require a new replacement piece of toughened glass to be manufactured.

By law, it is a legal requirement for any glass in a door to be a safety glass and toughened safety glass cannot be cut. If you try to cut the glass, you will end up shattering the pane of glass - examples of this is when a car windscreen smashes, or you drop a drinking glass. It shatters into millions of small pieces rather than large shards of glass that can be dangerous to you and your pets.

Toughened glass has been put through several manufacturing processes that make it rigid, tough, and impervious to cutting; therefore, the hole for a cat flap needs to be cut before it goes through the toughening process as part of the manufacture of the new glass.

Tomsgates Jake White Oil Finish Rubberwood for Doors JKEwtDR